We have CID certified Printed circuit board designers who can design PCBs from design to delivery. We can develop EMI/EMC compliant design and can test them in Environmental chamber as well. We are also capable of developing “extreme electronics” using SiC for high temperature and corrosive applications.
Our PBC designing process involves following:
Software used for our designs are the following
3.PCB123(for single layered boards only)
4.AUTOCAD(used if necessary)
Apparatus used for production
1.SMT stenciling machine
2.Insulation Resistance(IR) testing machine for developing Intrinsically Safe(IS) PCBs that are tobe used in areas where hazardous flammable gases like methane etc are present
SPECIFICATION STANDARDS MAINTAINED for designs
1.IP65 (under which environmental tests of heat, humidity, vibration, impact are done).
2.IEC60079-7( intrinsically safe PCB)
3.IEC600112(maintaining the insulation of materials under moist conditions)
4.IEC60127-1(if there is any provision of fuses in the PCB)
5.IEC60529(for enclosure PCBs)
6.IEC60079-11(for PCBs used in ultra sensitive areas)
Single layered PCB design Layout
Single layered PCB design
Single layered PCB based sequential timing system that can be programmed(selecting time intervals etc).Unit is attached to conveyor belt systems etc for presetting their time, duration etc
Double side / Multi layered PCB design
This is a multilayed blank PCb used in a data logging system .This system is used in defence, mining, chemical plants for data logging.
A single controller based PCB with 6 layers used in RFID transreceiver where it collects data from a RFID tag and process it and then transmit it to be interfaced with other control systems(RS485 protocol).
This is a Multilayered PCB using a VLSI controller for the automated control of aircirculation system in underground mines by sensing level of gases like oxygen ,methane and automatically controls the air circulating system(its back up and everything).Wheneverer level of oxygen falls below a particular level this system automatically activates the pumping system of oxygen from the surface.
This is an automated system that collects data from various sensors like temperature, humidity,Infra Red motion detectors, RF motion detectors etc and process them and then automatically monitor and drive any system(e.g. cooling system in a cyclotron).
RF sensor based remote control that can be used to switch ON/OFF any system or send commands to any system which is located in hazardous areas like(places where possibility of radio active radiation).It operates from a distance of more than 1km(can be extended upto 3 km.
A Robotic Control System with servo motor and display unit showing the latest status.This Embedded PCB is used for making robotic control unit opretaed by servo motors.The unit can receive signals from different sensors(e.g. sulphidegas sensors and automatically command any system on the basis of the received signals per requirement).
Double sided PCB with VLSI controller.Used mainly as VFD(variable frequency drive) for controlling speeds of motors specially those used in conveyor belt systems
FPGA(FIELD PROGRAMMABLE GATE ARRAY) based PCB used in different works in any automated control system by processing commands from different sensors, voice commands etc.
PCB showing a digital status indicator which is coupled with a complex production process comprising of many units.the LCD unit shows whether the entire system is running smoothly or not.It also shows which unit is malfunctioning, thus making maintainance and surveillance easy.The unit can be coupled with other dataloggers etc via RS232.
Double sided PCB for sensors with smd components which is capable of receiving and processing datas from Infra sensors, RF sensors, Gas sensors(diff types)Ultrasound sensors to perform various tasks .
Software tools that are used to design the firmware of ARM microcontroller including the latest versions
i> ARM Development Studio 5(DS5)
ii> Keil MDK-ARM(mainly for ARM7 ARM9 Cortex R4 processors)